
Vert and Warp feed mods $35
Factory feed tubes are silver soldered, mine are T.I.G. welded.
THIS MOD REQUIRES THE USE OF A SLIP-ON FEED NECK, SPYDER FEED NECKS ARE COMMONLY USED.
This mod will ruin the current finish around the feedtube and will need refinished.
See prices and details listed below.
Vertfeed- Powdercoated Black
Note: I no longer powdercoat the entire feed neck.
The upper part is left raw so your slip-on neck fits properly.
Vertfeed-Raw
Warpfeed Mod- Raw

Holds 12 rounds, end cap and powerfeed plug are not included.
Note: I do NOT sell bodies, this is a mod service only.
This mod will work with all AGD stainless steel bodies.
The only ones I won't do are those that I have already modded with my vert or warp feedtube mod.
This mod will ruin the current finish around the feedtube and will need refinished.
See prices and details listed below.
This marker belongs to Mr doo doo of AO >>>

This marker belongs to splattttttt of AO >>>

Springs and Plungers
Springs are 6" in length.
$1 each
10 or more $0.75 each
Plungers and screw: $8
Plunger measures .740" OD

Finishing prices for all feedtube mods.
Raw- No charge
After the mod is completed, the welds are smoothed over and surrounding area is cleaned up. (see pictures)
Bead Blasting $15
Polishing- Currently not available.
Powdercoating $25
If you want your body powdercoated you must also send in your rail.
(I do not powder coat the underside of the body because of tollerance issues, I need the rail to use as a guide to tape the body off for the powdercoating.)