Special Offer "Option" for Clearance Items (No limit):
Will trade stock AGD rails at a $20 value for parts listed on this page.
I'm looking for stock Automag, Minimag, Emag and RTPro rails. (I will not accept RT rails, sorry) They must be "stock" meaning no ULE milling, pump slot, non dremeled, no Warpfeed milling etc. Scratched anodizing is OK as long as it's not excessively deep. No anodizing is OK. I'm not going to be real picky about these, but I have the final say before closing a deal.
I reserve the right to cancel a sale if I determine it to be unusable for any reason. If you think there may be a problem with your rail for reasons listed above or some other reason, you have the burden of describing the issues as best as possible before you send it in for trade.
You will be responsible for return shipping if an "optional" trade agreement can not be made.
Springs and Plungers
Springs are 6" in length.
$1 each
10 or more $0.75 each
Plungers and screw: $8
Plunger measures .740" OD
Aluminum Emag Panels Raw $10
Dust Black $18
Sold as "BLEMS".
Purchase a set of "blems" and get an Emag switch for $6.
These are being sold as "blems" because of a screw-up during production.
The Emag switch "cut out" was cut a little too deep. See picture for details.
I can't absorb the cost of finishing on these, so powder coated sets will be an additional $8.
Zgrip Blade Trigger $15
Available in Dust Black or Raw
Zgrip Blade trigger $18
Available in Dust Black or Raw
Used Pachmayr 45 Grips $15 (One available, in great shape)
Used PTP 45 Grips $12 (One available, in great shape)
Used Hogue 45 Grips $10 (One set available, in great shape)
AGD Intelliframe mounting plate $10 ea.
Plate is made from 1/8" aluminum and machined to fit flush to the face on the left side of the frame (behind the intelli switch mount)
The factory brace must be removed or machined down for the plate to fit in the frame.
Plate comes with : (2) 6-32 screws (2) 6-32 nuts (2) #6 flat washers.
Picture of front and back of plate.
(Frame only requires 1 plate)
Inside of frame.
Plate is flush to outside surface.
Hyperframe/ Uprising Blade Triggers $20
3 trigger adjustments: forward, backward and switch depth.
Currently only vailable in Dust Black or Raw
These triggers can also be used on the Centerflag Uprising Frame.
This marker belongs to gremlin75 of AO >>>
HF Switch
(You install) $5
80g switch (NO BOARD CONNECTIONS)
Hyperframe Switch Screws $2 set
Aluminum Hyperframe panels
$25 Raw
$28 Dust Black
Comes with screws and LED screen (Glass)
Digi-Key part numbers QED423-ND and QSD722-ND $1.50 per set
(2 sets availible)
Red LED $1.50 each (3 available)
Green LED $1.50 each (3 available)
Tac-One Eye Covers $12
Drop- Dust Black (Gloss shown in picture) $10 (1 available)
Dove tail AND 2 screw standard mounting.
Spyder Sear and Spring (NEW) $6.00 each (4 available)
Plastic Hyperframe Panels $5 each
Comes with screws and new window glass.
Order by number.
Plastic Y-Grip Panels $5 each
The mold for these panels have been destroyed,
so this is the very last of this series, get-em before their gone!
Order by number.
Plastic Emag panels $5 each
